Parameter
Secondary NTP Server
VLAN Settings
Parameter
Enable VLAN
VLAN ID
Enable CDP
SIP Tab
This section describes the fields for the following headings on the SIP tab:
•
SIP Parameters, page -130
•
SIP Timer Values (sec), page -133
•
Response Status Code Handling, page -134
•
RTP Parameters, page -135
•
SDP Payload Types, page -137
•
NAT Support Parameters, page -139
•
Linksys Key System Parameters, page -140
SIP Parameters
Parameter
Max Forward
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
IP address or name of secondary NTP server.
Description
Enable this parameter if the switch to which the Linksys
IP phone is connected uses VLAN tagging.
Enter the VLAN tag for the VLAN to which the Linksys IP
phone is assigned. This should be the same VLAN to
which the SPA9000 is assigned.
Enables or disables Cisco Discovery Protocol (CDP).
Defaults to Yes.
Description
SIP Max Forward value, which can range from 1 to 255.
Defaults to 70.
Cisco Confidential--First Draft
SIP Tab
130