Disabling/Deactivating Services - Linksys SPA922 Administrator's Manual

• Secure No Calls (*17)—Defaults to prefer to use unencrypted media for all outbound calls. Applies to
all extensions.
• Secure Next Call (*18)—Prefers to use encrypted media for the next outbound call (on this call
appearance only).
• Do Not Secure Next Call (*19)—Prefers to use unencrypted media for the next outbound call (on this
call appearance only).
• Do Not Disturb (*78)—Applies to all extensions.
• Cancel Do Not Disturb (*79)—Applies to all extensions.
• Block Anonymous Calls—Applies to all extensions.
• Cancel Block Anonymous Calls—Applies to all extensions.
• Blind Transfer (*98)—This allows you to transfer a call to another person without talking to that
person:
1. Put the call on hold.
2. Get a dial tone on another line.
3. Call the person to whom you are transferring the call by pressing *98, followed by their
extension.
4. Hang up the receiver.

Disabling/Deactivating Services

You can disable services handled locally by the phone in one of two ways:
• Clear the star code in the Vertical Service Activation section above
• Disable the service in the Phone tab
page 89 section
Note that if a service is enabled in the Phone tab but cleared in the Regional tab, the service can
still be enabled/disabled by the end- user from the phone LCD or the web UI.
If a service is disabled, the soft button associated with that service is hidden on the LCD. Also,
any menu item associated with a disabled service is preceded with an exclamation mark (!) .
Vertical Service Announcement Codes
Vertical Service Announcement Codes allow the network to play a service announcement
when a Supplementary (Vertical) service is activated by the phone (for example, when a user
activates call forwarding in the phone, the phone calls a specific number for the announcement
server to play a message "All your calls will be forwarded to the number 555-555-555").
SPA9x2 phones support all services that can be activated on a phone (call forward, do not
disturb, and so on). Vertical service announcement codes apply only when the user dials the
corresponding star code.
Linksys SPA9x2 Phone Administration Guide
Setting Regional Parameters
Vertical Service Announcement Codes
"Supplementary Services Parameters" section on
3-4
73