Parameter
Media Loopback
Downloaded Ring Tone
Parameter
Status
Ring Tone 1
Ring Tone 2
System Tab
This section describes the fields for the following headings on the System tab:
•
System Configuration, page -127
•
Internet Connection Type and Static IP Settings, page -128
•
Optional Network Configuration, page -129
•
VLAN Settings, page -130
System Configuration
Parameter
Restricted Access Domains
Enable Web Server
Web Server Port
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
If the call is a loopback call, displays the loopback mode (source
or mirror) and type (media or packet). If the call is not loopback,
the field appears blank.
Description
Indicates whether the phone is downloading a ring tone
(and from where) or if it is idle.
Information about the user downloaded ring tone 1:
name, size, and time-stamp of the tone.
Information about the user downloaded ring tone 2:
name, size, and time-stamp of the tone.
Description
This feature is used when implementing software
customization.
Enable/disable web server of SPA9x2
This feature should only be used on firmware version
1.0.9 or later.
Defaults to yes.
Port number of the SPA9x2 web UI.
Defaults to 80.
Cisco Confidential--First Draft
System Tab
127