Proxy And Registration - Linksys SPA922 Administrator's Manual

Proxy and Registration

Parameter
Proxy
Use Outbound Proxy
Outbound Proxy
Use OB Proxy In Dialog
Register
Make Call Without Reg
Register Expires
Ans Call Without Reg
Use DNS SRV
DNS SRV Auto Prefix
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
SIP proxy server and port number set by the Service Provider
for all outbound requests. For example: 192.168.2.100:6060.
Enable the use of <Outbound Proxy>. If set to no,
<Outbound Proxy> and <Use OB Proxy in Dialog) is
ignored. Defaults to no.
SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
Whether to force SIP requests to be sent to the
outbound proxy within a dialog. Ignored if <Use
Outbound Proxy> is no or <Outbound Proxy> is empty.
Defaults to yes.
Enable periodic registration with the <Proxy>. This
parameter is ignored if <Proxy> is not specified.
Defaults to yes.
Allow making outbound calls without successful
(dynamic) registration by the unit. If no, the dial tone will
not play unless registration is successful.
Defaults to no.
Allow answering inbound calls without successful (dynamic)
registration by the unit. If proxy responded to REGISTER with a
smaller Expires value, the phone will renew registration based on
this smaller value instead of the configured value. If registration
failed with an Expires too brief error response, the phone will
retry with the value given in the Min-Expires header in the error
response.
Defaults to 60.
If enabled, the user does not have to be registered with the proxy
to answer calls.
Defaults to no.
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
Defaults to no.
If enabled, the phone will automatically prepend the
Proxy or Outbound Proxy name with _sip._udp when
performing a DNS SRV lookup on that name.
Defaults to no.
Cisco Confidential--First Draft
Ext Tab
171