Pppoe Settings; Optional Network Configuration - Linksys 900 Series Administrator's Manual

Chapter 5 900 Series phone Field Reference

PPPoE Settings

Field
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name

Optional Network Configuration

Field
Host Name
Domain
Primary DNS
Secondary DNS
DNS Server Order
DNS Query Mode
Syslog Server
Debug Server
Debug Level
Primary NTP Server
Document Version 3.1
Description
Specifies the account name assigned by the ISP for connecting on a Point-to-Point
Protocol over Ethernet (PPPoE) link.
Specifies the password assigned by the ISP for connecting on a Point-to-Point Protocol
over Ethernet (PPPoE) link.
Specifies the service name assigned by the ISP for connecting on a Point-to-Point Protocol
over Ethernet (PPPoE) link.
Description
The host name of the 900 Series phone.
The network domain of the 900 Series phone.
DNS server used by 900 Series phone in addition to DHCP supplied DNS servers if DHCP
is enabled; when DHCP is disabled, this is the primary DNS server.
The default is 0.0.0.0.
DNS server used by 900 Series phone in addition to DHCP supplied DNS servers if DHCP
is enabled; when DHCP is disabled, this is the secondary DNS server.
The default is 0.0.0.0.
Specifies the method for selecting the DNS server. The options are Manual,
Manual/DHCP, and DHCP/Manual.
Do parallel or sequential DNS Query. With parallel DNS query mode, the 900 Series
phone sends the same request to all the DNS servers at the same time when doing a DNS
lookup, the first incoming reply is accepted by the 900 Series phone.
The default is parallel.
Specify the syslog server name and port. This feature specifies the server for logging 900
Series phone system information and critical events. If both Debug Server and Syslog
Server are specified, Syslog messages are also logged to the Debug Server.
The debug server name and port. This feature specifies the server for logging 900 Series
phone debug information. The level of detailed output depends on the debug level
parameter setting.
The higher the debug level, the more debug information is generated. Zero (0) means no
debug information is generated. To log SIP messages, Debug Level must be set to at least
2.
The default is 0.
IP address or name of primary NTP server.
Linksys 900 Series IP Phone Administrator Guide
System Tab
5-7