Static Ip Settings; Pppoe Settings; Optional Network Configuration - Linksys SPA 900 Series Administration Manual

Chapter 5 Linksys IP Phone Field Reference
Field
Gateway
(SPA901 only)

Static IP Settings

Note None of the following parameters apply to the SPA901.
Field
Static IP
Netmask
Gateway

PPPoE Settings

None of the following parameters apply to the SPA901.
Note
Field
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name

Optional Network Configuration

Field
Host Name
Domain
Primary DNS
Firmware Version 5.1
Description
Default router IP address. Blank if DHCP assigned.
Description
IP address. Blank of DHCP assigned address is used.
Network mask. Blank if DHCP assigned.
Default router IP address. Blank if DHCP assigned.
Description
Specifies the account name assigned by the ISP for connecting on a Point-to-Point
Protocol over Ethernet (PPPoE) link.
Specifies the password assigned by the ISP for connecting on a Point-to-Point Protocol
over Ethernet (PPPoE) link.
Specifies the service name assigned by the ISP for connecting on a Point-to-Point Protocol
over Ethernet (PPPoE) link.
Description
The host name of the Linksys IP phone.
The network domain of the Linksys IP phone.
DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if
DHCP is enabled; when DHCP is disabled, this is the primary DNS server.
Defaults to 0.0.0.0.
Linksys IP Phone Administrator Guide
System Tab
5-7