Automatic Call Back; Call Fwd—Unconditional - Linksys SPA1001 Administrator User Manual

Appendix C User Guidelines

Automatic Call Back

Service description
User action required to
activate or use
Expected call and
network behavior
User action required to
deactivate or end
Call FWD—Unconditional
Service description
User action required to
activate or use
Document Version 3.01
This feature allows the user to place a call to the last number they tried to
reach whether the call was answered, unanswered, or busy, by dialing an
activation code.
Pick up the receiver
1.
Listen for dial tone
2.
Press *07
3.
If the number called is idle, the call rings through and completes normally. If
the called number is busy, the user hears a special announcement and the
feature monitors the called number for up to 30 minutes. When both lines are
idle, the user hears a special ring.
During the monitoring process, the user can continue to originate and receive
calls without affecting the Call Return on Busy request. Call Return on Busy
requests can be canceled by dialing the deactivation code.
1. Lift the receiver
2. Listen for dial tone
3. Press *__
All calls are immediately forwarded to the designated forwarding number.
The SPA does not ring or provide call waiting when Call
FWD–Unconditional is activated.
1. Lift the receiver
2. Listen for dial tone
Press *72
3.
Listen for dial tone and enter the telephone number you are forwarding
4.
your call to.
Activation is confirmed with three short bursts of tone and your forwarding
is activated.
Alternatively, the user can activate this feature from a web browser interface.
Enhanced Services
Linksys ATA Administrator Guide
C-9