Call Fwd – Busy - Linksys SPA1001 Administrator User Manual

Enhanced Services
Expected call and
network behavior
User action required to
deactivate or end
Call FWD – Busy
Service description
User action required to
activate or use
Expected call and network
behavior
User action required to
deactivate or end
Linksys ATA Administrator Guide
C-10
This feature allows a user the option to divert (forward) all calls to their
telephone number to any number using the touchtone keypad of their
telephone or web browser interface. This service is activated or deactivated
from the phone being forwarded or the web browser interface.
Lift the receiver
1.
Listen for dial tone
2.
Press *73
3.
You will hear a confirmation tone signaling your change has been accepted.
Alternatively, the user can deactivate this feature from a web browser
interface.
Calls are forwarded to the designated forwarding number if the subscriber
line is busy because of the following: primary line already in a call,
primary and secondary line in a call or conference.
Lift the receiver
1.
Listen for dial tone
2.
Press *90
3.
Listen for dial tone and enter the telephone number you are
4.
forwarding your call to.
Activation is confirmed with three short bursts of tone and your
forwarding is activated.
Alternatively, the user can activate this feature from a web browser
interface.
This feature allows a user the option to divert (forward) calls to their
telephone number to any number when their phone is busy or in
conference by using the touchtone keypad of their telephone or web
browser interface. This service is activated or deactivated from the phone
being forwarded or the web browser interface.
Lift the receiver
1.
Listen for dial tone
2.
Press *91
3.
You will hear a confirmation tone signaling your change has been
accepted.
Alternatively, the user can deactivate this feature from a web browser
interface.
Appendix C User Guidelines
Document Version 3.01