Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports
The Phone Adapter's ports are located on the back panel.
Figure 2-1: Back Panel
PHONE 1 Port
For your primary Internet phone line, the PHONE 1 port allows you to connect your
telephone to the Phone Adapter using an RJ-11 telephone cable (not included).
PHONE 2 Port
If you add a second Internet phone line, then use the PHONE 2 port. It allows you to connect
a second telephone (or fax machine) to the Phone Adapter using an RJ-11 telephone cable
(not included).
NOTE: The Phone ports do not carry any voltage.
ETHERNET Port
The ETHERNET port allows you to connect the Phone Adapter to your router or gateway
using a Category 5 (or better) Ethernet network cable.
POWER Port
The POWER port is where you will connect the included power adapter.
Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports
Internet Phone Adapter with 2 Ports for Voice-over-IP
3