Audio Configuration - Linksys SPA1001 Administrator User Manual

Line Tab
Field
Call Back Serv
Three Way Call Serv
Three Way Conf Serv
Attn Transfer Serv
Unattn Transfer Serv
MWI Serv
VMWI Serv
Speed Dial Serv
Secure Call Serv
Referral Serv
Feature Dial Serv
Service Announcement Serv

Audio Configuration

A codec resource is considered as allocated if it has been included in the SDP codec list of an active call,
even though it eventually may not be the one chosen for the connection. So, if the G.729a codec is
enabled and included in the codec list, that resource is tied up until the end of the call whether or not the
call actually uses G.729a. If the G.729a resource is already allocated and since only one G.729a resource
is allowed per device, no other low-bit-rate codec may be allocated for subsequent calls; the only choices
are G711a and G711u. On the other hand, two G.723.1/G.726 resources are available per device.
Linksys IP Phone Administrator Guide
5-42
Description
Enable Call Back Service
Enable Three Way Calling Service.
Conference and Attended Transfer.
The default is yes.
Enable Three Way Conference Service. Three Way Conference is required for Attended
Transfer.
The default is yes.
Enable Attended Call Transfer Service. Three Way Conference is required for Attended
Transfer.
The default is yes.
Enable Unattended (Blind) Call Transfer Service.
The default is yes.
MWI is available only if a Voice Mail Service is set-up
Enable MWI Service.
in the deployment.
The default is yes.
Enable VMWI Service (FSK).
The default is yes.
Enable Speed Dial Service.
The default is yes.
Enable Secure Call Service.
The default is yes.
Enable Referral Service. See <Referral Services Codes> for more details.
The default is yes.
Enable Feature Dial Service. See <Feature Dial Services Codes> for more details.
The default is yes.
Enable Service Announcement Service.
The default is yes.
(Not in PAP2T)
Chapter 5
Three Way Calling is required for Three Way
Linksys ATA Field Reference
Document Version 3.2