Linksys SPA1001 Administrator User Manual page 115

Chapter 5 Linksys ATA Field Reference
FXS Port Input Gain
FXS Port Output Gain
DTMF Playback Level
DTMF Playback Length
Detect ABCD
Playback ABCD
Caller ID Method
Caller ID FSK Standard
FXS Port Power Limit
Document Version 3.2
Input gain in dB, up to three decimal places. The range is 6.000 to -12.000.
The default is -3.
Output gain in dB, up to three decimal places. The range is 6.000 to -12.000. The Call
Progress Tones and DTMF playback level are not affected by the <FXS Port Output
Gain>.
The default is -3.
Local DTMF playback level in dBm, up to one decimal place.
The default is -16.0.
Local DTMF playback duration in milliseconds.
The default is .1.
To enable local detection of DTMF ABCD, select yes. Otherwise, select no.
The default is yes. Setting has no effect if DTMF Tx Method is INFO; ABCD is always
sent OOB regardless in this setting.
To enable local playback of OOB DTMF ABCD, select yes. Otherwise, select no.
The default is yes.
The following choices are available:
Bellcore (N.Amer,China)—CID, CIDCW, and VMWI. FSK sent after first ring (same
•
as ETSI FSK sent after first ring) (
DTMF (Finland, Sweden)—CID only. DTMF sent after polarity reversal (and
•
DTAS) and before first ring.
• DTMF (Denmark)—CID only. DTMF sent after polarity reversal (and
before first ring.
• ETSI DTMF—CID only. DTMF sent after DTAS (and
before first ring.
ETSI DTMF With PR—CID only. DTMF sent after polarity reversal and DTAS and
•
before first ring.
ETSI DTMF After Ring—CID only. DTMF sent after first ring (
•
or DTAS).
ETSI FSK—CID, CIDCW, and VMWI. FSK sent after DTAS (but
•
reversal) and before first ring. Waits for ACK from CPE after DTAS for CIDCW.
ETSI FSK With PR (UK)—CID, CIDCW, and VMWI. FSK is sent after polarity
•
reversal and DTAS and before first ring. Waits for ACK from CPE after DTAS for
CIDCW. Polarity reversal is applied only if equipment is on hook.
The default is Bellcore(N.Amer, China).
The Linksys IP phone supports bell 202 and v.23 standards for caller ID generation. Select
the FSK standard you want to use, bell 202 or v.23.
The default is bell 202.
The choices are from 1 to 8. (PAP2T only)
The default is 3.
no
polarity reversal or DTAS).
no
polarity reversal) and
Linksys IP Phone Administrator Guide
Regional Tab
no
no
DTAS) and
no
polarity reversal
no
polarity
5-31