Linksys SPA1001 Administrator User Manual page 48

Using the Interactive Voice Response Interface
Table 1-25 IVR Options (continued)
Set Network Mask
Check Static Gateway IP
Address
Set Static Gateway IP
Address
Check MAC Address
Check Firmware Version
Check Primary DNS
Server Setting
Set Primary DNS Server
Check administration
web server port
Check LAN IP Address
Check PBX multicast
address
Set PBX multicast
address
Enable/Disable
administration web
server
Manual Reboot of Unit
Linksys ATA Administrator Guide
2-20
121 Enter value using numbers
on the telephone key pad.
Use the * (star) key when
entering a decimal point.
130 None
131 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point.
140 None
150 None
160 None
161 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point.
170 None
210 None
180 None
181 Enter IP address and port.
Use * key for entering a dot.
For example,
224.168.168.169:8089 is
224*168*168*169*8089.
7932 Enter 1 to enable
Enter 0 to disable
732668 None
Chapter 2
DHCP must be "Disabled," otherwise
you hear, "Invalid Option," if you try to
set this value.
Requires password
IVR announces the current gateway IP
address of the Linksys ATA.
DHCP must be "Disable," otherwise you
hear, "Invalid Option," if you try to set
this value.
Requires password
IVR announces the MAC address of
Linksys ATA in hex string format.
IVR announces the version of the
firmware running on the Linksys ATA.
IVR announces the current setting in the
<Primary DNS> parameter.
Requires password
IVR announces the port that the web
server is listening on. (Default is 80)
IVR announces the current IP address of
the LAN port.
IVR announces the current value.
Enter a * between the IP address and the
Port fields. Requires Password
Requires password
After you hear "Option Successful,"
hang up. Unit reboots automatically.
Document Version 3.1
Getting Started