Dial Plan Timers; Interdigit Long Timer; Interdigit Short Timer; Dial Plans - Linksys SPA1001 Administrator User Manual

Chapter 3 Configuring Linksys ATAs

Dial Plan Timers

The dial plan functionality is regulated by the following configurable parameters:
•
•
•

Interdigit Long Timer

ParName
Default
The <Interdigit_Long_Timer> specifies the default maximum time (in seconds) allowed between dialed
digits, when no candidate digit sequence is as yet complete (see the discussion of the Dial_Plan
parameter for an explanation of candidate digit sequences).

Interdigit Short Timer

ParName
Default
The <Interdigit_Short_Timer> specifies the default maximum time (in seconds) allowed between dialed
digits, when at least one candidate digit sequence is complete as dialed (see the following discussion of
Dial_Plan parameters for an explanation of candidate digit sequences).

Dial Plans

ParName
Default
The Dial_Plan parameters contain the actual dial plan scripts for each line n, where n is a number from
1 to 4.
Document Version 3.1
Interdigit_Long_Timer
Interdigit_Short_Timer
Dial_Plan ([1] and [2])
Interdigit_Long_Timer
10
Interdigit_Short_Timer
3
Dial_Plan[n] for Each Line n
(*xx | [3469]11 | 0 | 00 | <:1408>[2-9]xxxxxx |
1[2-9]xx[2-9]xxxxxx | 011x. )
Configuring a Dial Plan
Linksys ATA Administrator Guide
3-9