Response Status Code Handling; Rtp Parameters - Linksys SPA1001 Administrator User Manual

SIP Tab

Response Status Code Handling

Field
SIT1 RSC
SIT2 RSC
SIT3 RSC
SIT4 RSC
Try Backup RSC
Retry Reg RSC

RTP Parameters

Field
RTP Port Min
RTP Port Max
RTP Packet Size
Max RTP ICMP Err
Linksys IP Phone Administrator Guide
5-14
Description
SIP response status code for the appropriate Special Information Tone (SIT). For example,
if you set the SIT1 RSC to 404, when the user makes a call and a failure code of 404 is
returned, the SIT1 tone is played.
unsuccessful response status code for SIT 1 RSC through SIT 4 RSC.
SIP response status code to INVITE on which to play the SIT2 Tone.
SIP response status code to INVITE on which to play the SIT3 Tone.
SIP response status code to INVITE on which to play the SIT4 Tone.
SIP response code that retries a backup server for the current request.
Interval to wait before the Linksys IP phone retries registration after failing during the last
registration.
The default is 30.
Description
Minimum port number for RTP transmission and reception.
<RTP Port Max> should define a range that contains at least 4 even number
ports, such as 100 – 106.
The default is 16384.
Maximum port number for RTP transmission and reception.
The default is 16482.
Packet size in seconds, which can range from 0.01 to 0.16. Valid values must be a multiple
of 0.01 seconds.
The default is 0.030.
Number of successive ICMP errors allowed when transmitting RTP packets to the peer
before the Linksys IP phone terminates the call. If value is set to 0, the Linksys IP phone
ignores the limit on ICMP errors.
The default is 0.
Chapter 5
Reorder or Busy Tone is played by default for all
Linksys ATA Field Reference
<RTP Port Min> and
Document Version 3.2