Linksys SPA1001 Administrator User Manual page 36

Linksys Analog Telephone Adapters (ATAs)
Figure 1-9
The following tables describe the LEDS on the front panel and the ports on the back panel of the device.
Table 1-14 SPA3102 Front Panel
LED
Power
Internet
Phone
Line
Table 1-15 SPA3102 Back Panel
Port
Line
Phone
Ethernet
Internet
Power
Linksys ATA Administrator Guide
2-8
SPA3102
Function
Steady green indicates power on and Internet connection. Flashing indicates
not connected to the Internet, booting or firmware upgrade.
Steady green indicates active connection. Flashing indicates traffic.
Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Steady green when a telephone or fax machine has an active connection to
traditional phone service through the Line port.
Function
Connect to a standard telephone wall jack with an RJ-11cable.
Connect to an analog telephone or fax machine with an RJ-11 cable.
Connect to a network device, such as a PC or a switch with an Ethernet
cable.
Connect to a router or broadband (cable/DSL) modem.
Connect to the power supply.
Chapter 2 Getting Started
Document Version 3.1