Linksys SPA1001 Administrator User Manual page 90

Info Tab
Call Type
VoIP State
PSTN State
VoIP Tone
PSTN Tone
VoIP Peer Name
PSTN Peer Name
VoIP Peer Number
PSTN Peer Number
VoIP Call Encoder
VoIP Call Decoder
VoIP Call FAX
VoIP Call Remote Hold
VoIP Call Duration
VoIP Call Packets Sent
VoIP Call Packets Recv
VoIP Call Bytes Sent
VoIP Call Bytes Recv
VoIP Call Decode Latency
VoIP Call Jitter
VoIP Call Round Trip Delay
Linksys IP Phone Administrator Guide
5-6
May take one of the following values:
PSTN Gateway Call = VoIP-To-PSTN Call
•
VoIP Gateway Call = PSTN-To-VoIP Call
•
• PSTN To Line 1 = PSTN call ring through and answered by Line 1
• Line 1 Forward to PSTN Gateway = VoIP calls Line 1 then forwarded to PSTN GW
• Line 1 Forward to PSTN Number =VoIP calls Line 1 then forwarded to PSTN number
Line 1 To PSTN Gateway
•
Line 1 Fallback To PSTN Gateway
•
Same as Line 1 Call 1.
May take one of the following values:
Idle
•
Collecting PSTN Pin
•
Invalid PSTN PIN
•
• PSTN Caller Accepted
• Connected to PSTN
Same as Line 1 Call 1 (Indicate what tone is being played to the VoIP call leg).
Indicate what tone is being played to the PSTN call leg.
Same as Line 1 Call 1 (Name of the party at the VoIP call leg).
Name of the party at the PSTN call leg.
Same as Line 1 Call 1 (Phone number of the party at the VoIP call leg).
Phone number of the party at the PSTN call leg.
Same as Line 1 Call 1 (Audio encoder being used for the VoIP call leg).
Same as Line 1 Call 1 (Audio decoder being used for the VoIP call leg).
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Same as Line 1 Call 1.
Chapter 5 Linksys ATA Field Reference
Document Version 3.2