Speed Dial Settings; Supplementary Service Settings - Linksys SPA1001 Administrator User Manual

Chapter 5 Linksys ATA Field Reference

Speed Dial Settings

Field
Speed Dial 2/3/4/5/6/7/8/9

Supplementary Service Settings

The Linksys IP phone provides native support of a large set of enhanced or supplementary services. All
of these services are optional. The parameters listed in the following table are used to enable or disable
a specific supplementary service. A supplementary service should be disabled if a) the user has not
subscribed for it, or b) the Service Provider intends to support similar service using other means than
relying on the Linksys IP phone.
Field
CW Setting
Block CID Setting
Block ANC Setting
DND Setting
CID Setting
CWCID Setting
Dist Ring Setting
Secure Call Setting
Miss Call Shortcut
Message Waiting
Document Version 3.2
Description
Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7, 8, or 9.
The default is blank.
Description
Call Waiting on/off for all calls.
The default is yes.
Block Caller ID on/off for all calls.
The default is no.
Block Anonymous Calls on or off.
The default is no.
DND on or off.
The default is no.
Caller ID Generation on or off.
The default is yes.
Call Waiting Caller ID Generation on or off.
The default is yes.
Distinctive Ring on or off.
The default is yes.
If yes, all outbound calls are secure calls by default.
The default is no.
Enables or disables the display of missed calls on the LCD display.
This is updated when there is voicemail notification received by the Linksys IP phone.
The user can also manually modify it to clear or set the flag. Setting this value to yes can
activate stutter tone and VMWI signal. This parameter is stored in long term memory and
will survive after reboot or power cycle.
The default is no.
Linksys IP Phone Administrator Guide
User 1/2 Tab
5-67