Call Feature Settings; Proxy And Registration - Linksys SPA1001 Administrator User Manual

Line Tab
Refer-To Target Contact
Sticky 183
Auth INVITE
Reply 182 On Call Waiting

Call Feature Settings

Field
Blind Attn-Xfer Enable
MOH Server
Xfer When Hangup Conf
Conference Bridge URL
Conference Bridge Ports

Proxy and Registration

Field
Proxy
Linksys IP Phone Administrator Guide
5-38
To contact the refer-to target, select yes. Otherwise, select no.
The default is no.
If this feature is enabled, the IP telephony ignores further 180 SIP responses after
receiving the first 183 SIP response for an outbound INVITE. To enable this feature,
select yes. Otherwise, select no.
The default is no.
When enabled, authorization is required for initial incoming INVITE requests from the
SIP proxy.
To use this feature, select yes. Otherwise, keep the default, no.
Description
Enables the Linksys IP phone to perform an attended transfer operation by ending the
current call leg and performing a blind transfer of the other call leg. If this feature is
disabled, the Linksys IP phone performs an attended transfer operation by referring the
other call leg to the current call leg while maintaining both call legs. To use this feature,
select yes. Otherwise, select no.
The default is no.
User ID or URL of the auto-answering streaming audio server. When only a user ID is
specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the
MOH Server is not specified.
Makes the Linksys IP phone perform a transfer when a conference call has ended. Select
yes or no from the drop-down menu.
The default is yes.
This feature supports external conference bridging for n-way conference calls (n > 2),
instead of mixing audio locally. To use this feature, set this parameter to that of the
server's name, for example, conf@myserver.com:12345 or conf (which uses the Proxy
value as the domain).
Select the maximum number of conference call participants. The range is 3 to 10. The
default is 3.
Description
SIP proxy server for all outbound requests.
Chapter 5 Linksys ATA Field Reference
Document Version 3.2