Wrtp54G - Linksys SPA1001 Administrator User Manual

Chapter 2 Getting Started
The following tables describe the LEDS on the front panel and the ports on the back panel of the device
Table 1-18
LED
Ethernet 1-4
Wireless
Phone 1/2
Internet
Table 1-19 WRTP54G Back Panel
Port
Internet
Phone 1/2
Ethernet 1-4
Power

WRTP54G

The WRTP54G provides an ATA with two FXS ports and a Wireless-G multiport IP router (see
Figure
connectivity to a LAN with a built-in four-port switch. The IP router provides QoS support, an integrated
firewall and VPN pass-through, and full routing with DHCP and NAT.
Document Version 3.1
WRP400
Front Panel
Function
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Steady green when telephone or fax machine has an active or registered
connection to the ITSP through the Phone port. Flashing indicates phone is
in use or off hook.
Steady green indicates active connection. Flashing indicates traffic.
Function
Connect to the broadband (cable/DSL) modem using an Ethernet cable.
Connect to an analog telephone or fax machine using an RJ-11 cable.
Connect to local IP devices, such as PCs, using an Ethernet cable.
Connect to the 12-volt power supply.
1-12). The WRTP54G provides connectivity to an analog telephone as well as Internet
Linksys Analog Telephone Adapters (ATAs)
Linksys ATA Administrator Guide
2-11