Call Fwd—No Answer; Anonymous Call Blocking - Linksys SPA1001 Administrator User Manual

Appendix C User Guidelines
Call FWD—No Answer
Service description
User action required to
activate or use
Expected call and
network behavior
User action required to
deactivate or end

Anonymous Call Blocking

Service description
User action required to
activate or use
Expected call and
network behavior
User action required to
deactivate or end
Document Version 3.01
Calls are forwarded to the designated forwarding number after a
configurable time period elapses while the SPA is ringing and does not
answer.
1. Lift the receiver
2. Listen for dial tone
Press *92Listen for dial tone and enter the telephone number you are
3.
forwarding your call to.
Activation is confirmed with three short bursts of tone and your forwarding
is activated.
Alternatively, the user can activate this feature from a web browser
interface.
Note The forward delay is entered from the web interface. Default is 20s.
This feature allows a user the option to divert (forward) calls to their
telephone number to any other dialable number when their phone is not
answered by using the touchtone keypad of their telephone or web browser
interface. This service is activated or deactivated from the phone being
forwarded or the web browser interface.
Lift the receiver
1.
Listen for dial tone
2.
Press *93
3.
You will hear a confirmation tone signaling your change has been accepted.
Alternatively, the user can deactivate this feature from a web browser
interface.
By setting the corresponding configuration parameter on the SPA, the
subscriber has the option to block incoming calls that do not reveal the Caller
ID of the caller.
Pick up the receiver
1.
Listen for dial tone
2.
To activate, press *77
3.
When activated by the user, callers hear a busy tone.
To de-activate, press *87
Enhanced Services
Linksys ATA Administrator Guide
C-11