Subscriber Information (Spa3102/Ag310) - Linksys SPA1001 Administrator User Manual

PSTN Line Tab
Field
Proxy Fallback Intvl
Proxy Redundancy Method

Subscriber Information (SPA3102/AG310)

Field
Display Name
User ID
Password
Use Auth ID
Auth ID
Call Capacity
Mini Certificate
SRTP Private Key
Linksys IP Phone Administrator Guide
5-54
Description
This parameter sets the delay (sec) after which the PAP2T will retry from the highest
priority proxy (or outbound proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and backup proxy server list is
provided to the PAP2T via DNS SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion of priority and so all hosts will
be considered at the same priority and the PAP2T will not attempt to fall back after a fail
over).
The default is 3600
PAP2T will make an internal list of proxies returned in DNS SRV records. In normal mode
this list will contain proxies ranked by weight and priority.
if Based on SRV port is configured the PAP2T does normal first, and also inspect the port
st
number based on 1 proxy's port on the list.
The default is Normal.
Description
Display name for caller ID.
Extension number for this line.
Password for this line.
To use the authentication ID and password for SIP authentication, select yes. Otherwise,
select no to use the user ID and password.
The default is no.
Authentication ID for SIP authentication.
Maximum number of calls allowed on this line interface. Choices: {unlimited,1,2,3,...25
}. Default is 16. Note that the Linksys IP phone does not distinguish between incoming
and outgoing calls when talking about call capacity. Note: unlimited = 16
Base64 encoded of Mini-Certificate concatenated with the 1024-bit public key of the CA
signing the MC of all subscribers in the group.
The default is empty.
Base64 encoded of the 512-bit private key per subscriber for establishment of a secure
call.
The default is empty.
Chapter 5 Linksys ATA Field Reference
Document Version 3.2