Linksys Analog Telephone Adapters (ATAs)
Figure 1-7
The following table describes the LEDS and ports on the back panel of the device.
Table 1-11 SPA1001 Back Panel
LED/Port
Phone
Power
Act
Ethernet
SPA2102
The SPA2102 provides two FXS ports and an Ethernet port for connecting to a local PC or other Ethernet
device.
Linksys ATA Administrator Guide
2-6
SPA1001
Function
Connect to an analog telephone or fax machine with an RJ-11 cable.
Connect to the 5-volt DC power adapter.
Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Steady yellow indicates active Ethernet connection. Flashing indicates
traffic.
Connect to a router or broadband (cable/DSL) modem.
Chapter 2
Getting Started
Document Version 3.1