Selective Call Forward Settings - Linksys SPA1001 Administrator User Manual

User 1/2 Tab
Field
Cfwd No Ans Dest
Cfwd No Ans Delay

Selective Call Forward Settings

Field
Cfwd Sel1/2/3/4/5/6/7/8 Caller
Cfwd Sel1/2/3/4/5/6/7/8 Dest
Block Last Caller
Accept Last Caller
Cfwd Last Caller
Cfwd Last Dest
Linksys IP Phone Administrator Guide
5-66
Description
Forward number for Call Forward No Answer Service. Same as Cfwd All Dest.
In addition to normal call forward destination as used in the other ATAs, on the SPA3102,
you can specify the following additional parameters:
• gw0 – forward the caller to use the PSTN gateway
<pstn-number>@gw0 – forward to caller to the PSTN number (dialed automatically
•
by the SPA through the PSTN gateway)
The default is blank.
Delay in sec before Call Forward No Answer triggers. Same as Cfwd All Dest.
The default is 20.
Description
Caller number pattern to trigger Call Forward Selective 1, 2, 3, 4, 5, 6, 7, or 8.
The default is blank.
Forward number for Call Forward Selective 1, 2, 3, 4, 5, 6, 7, or 8.
Same as Cfwd All Dest.
The default is blank.
ID of caller blocked via the Block Last Caller service.
The default is blank.
ID of caller accepted via the Accept Last Caller service.
The default is blank.
The Caller number that is actively forwarded to <Cfwd Last Dest> by using the Call
Forward Last activation code
The default is blank.
Forward number for the <Cfwd Last Caller>
Same as Cfwd All Dest.
The default is blank.
Chapter 5 Linksys ATA Field Reference
Document Version 3.2