Wireless-B Notebook Adapter
Chapter 4: Software Installation and Configuration for
Windows 98SE, ME, and 2000
The Wireless-B Notebook Adapter Setup Wizard will guide you through the installation procedure. The Setup
Wizard will install the WLAN Monitor and driver, as well as configure the Adapter.
1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that
appears, enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
Chapter 4: Software Installation and Configuration for Windows 98SE, ME, and 2000
IMPORTANT: You must run the Setup Wizard to
install the software before connecting the Adapter. If
you are running Windows XP, connect the Adapter as
shown in Chapter 5 and proceed to Chapter 6.
Figure 4-1: The Setup Wizard's Welcome Screen
7