Chapter 4: Software Installation And Configuration For Windows 98Se, Me, And 2000; Figure 4-1: The Setup Wizard's Welcome Screen - Linksys WUSB11 User Manual

Wireless-B USB Network Adapter
Chapter 4: Software Installation and Configuration for
Windows 98SE, Me, and 2000
The Wireless Wireless-B USB Network Adapter Setup Wizard will guide you through the installation procedure for
Windows 98SE, Me, and 2000. The Setup Wizard will install the WLAN Monitor and driver, as well as configure the
Adapter.
NOTE: Windows XP Users. Do NOT run the Wireless-B USB Network Adapter
Setup Wizard. Proceed directly to "Chapter 5: Hardware Installation."
NOTE: Windows 98SE, Me, and 2000 users. You must run the Setup Wizard
to install the software before installing the hardware.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically,
and the Welcome screen should appear. If it does not, click the Start button and choose Run. In the
field that appears, enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
On the Welcome screen, you have the following choices:
Install - Click the Install button to begin the software installation process.
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.

Chapter 4: Software Installation and Configuration for Windows 98SE, Me, and 2000

wlan: a group of computers and associated devices that
communicate with each other wirelessly.

Figure 4-1: The Setup Wizard's Welcome screen

software: instructions for the computer
7