Linksys Pap2; Step 1 - Setup Account; Step 2 - Accessing The Pap2; Step 3 - Logging Into The Web Configuration Interface - Linksys PAP2 Configuration Manual

Hide thumbs Also See for PAP2:

VoiceDirector Device Configuration Guide

1. Linksys PAP2

This guide contains VoiceDirector configuration instructions for the Linksys PAP2

device.

STEP 1 – SETUP ACCOUNT

Make sure you have an account on the VoiceDirector server to which you are

connecting.

STEP 2 – ACCESSING THE PAP2

Connect an analog phone to the RJ-45 connector on the PAP2.

1. Using the telephone keypad, press the star key (*) four (4) times: ****.

You will be prompted to enter a code.

2. Enter the code 110 followed by the pound key (#).

The system announces the IP address. Write it down.

STEP 3 - LOGGING INTO THE WEB CONFIGURATION

INTERFACE

To log into the WRP200's Web Configuration Interface:

1. Launch Microsoft© Internet Explorer.

2. In the Address bar, enter http://, followed by the IP address you wrote

down in step 3 above.

For example, if your IP address is 192.168.1.100 you would enter

http://192.168.1.100 in the Address bar.

3. Press the Enter key on your keyboard, or click the Go button.

The status screen displays. You are now logged into the PAP2's Web

Configuration Interface.

All manuals and user guides at all-guides.com

Page 1

Linksys PAP2

Table of Contents