Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1377

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show port-channel internal
To display the PortChannel internal status, use the show port-channel internal command.
Syntax Description event-history
all
debugs
errors
interface
fa
fc
gigabitethernet
slot number
port-channel
port-channel number
lock
msgs
pcp
info
all
interface
mem-stats
detail
Defaults None.
Command Modes EXEC mode.
Command History Release
NX-OS 4.1(3)
Usage Guidelines
None.
Examples The following example shows how to configure the error logs for the PortChannel:
OL-18089-01, Cisco MDS NX-OS Release 4.x
show port-channel internal event-history {all | debugs | errors | interface {fa | fc |
gigabitethernet {slot number} port-channel {port-channel number} | lock | msgs | pcp} info
{ all | interface} mem-stats {detail}
Specifies a PortChannel.
Specifies interface event transition for all interfaces.
Specifies debug logs for a PortChannel.
Specifies error logs for a PortChannel.
Specifies interface event transitions.
Specifies the FA port interface.
Specifies the Fiber Channel interface.
Specifies the Ethernet interface.
Specifies the slot number.
Specifies the PortChannel interface.
Specifies the PortChannel number. The range is from 1 to 256.
Specifies lock log of the PortChannel.
Specifies message logs of the PortChannel.
Specifies interface PCP event transition.
Specifies internal information.
Specifies PortChannel global information.
Specifies PortChannel interface information.
Specifies memory allocation statistics of the PortChannel.
Specifies detail memory statistics for the PortChannel.
Modification
This command was introduced.
show port-channel internal
Cisco MDS 9000 Family Command Reference
22-309