Shared-Keymode - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

shared-keymode

To configure the shared key mode, use the shared-keymode command. To specify the unique key mode,
use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines
The shared-keymode command generates a single key that is used for a group of backup tapes.
The no shared-keymode generates unique or specific keys for each tape cartridge.
The shared unique key mode should be specified if you want to enable the key-ontape feature.
Note
Examples The following example specifies the shared key mode:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# shared-keymode
The following example specifies the shared unique keymode:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no shared-keymode
Related Commands Command
show sme cluster
OL-16217-01, Cisco MDS SAN-OS Release 3.x
shared-keymode
no shared-keymode
Modification
This command was introduced.
Description
Displays Cisco SME cluster information.
Cisco MDS 9000 Family Command Reference
shared-keymode
21-27