Getting To Know Your Spa400 - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Getting Started
Introducing Components of the SPA9000 Voice System
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard

Getting to Know Your SPA400

The SPA400 provides the SPA9000 access to the PSTN by connecting the FXO
ports to analog lines. The SPA400 also has a built-in voice mail server.
This section describes the LEDs on the front panel and the ports on the back panel
of the device.
SPA400 Front Panel
LED
POWER
STATUS
ETHERNET
LINE 1, 2, 3, 4
USB
Description/Notes
•
Steady green: The SPA400 is receiving power and is
connected to the Internet.
•
Flashing: The SPA400 is not connected to the Internet,
booting, or upgrading firmware.
•
Steady green: The SPA9000 is registered to the SPA400.
•
Flashing: The SPA9000 is not registered to the SPA400.
•
Steady green: The SPA400 has an active connection
through the Ethernet port.
•
Flashing: Network activity is occurring over the
ETHERNET port.
•
Steady green: The line is active.
•
Flashing: The line is ringing.
•
Off: The line is idle.
•
Steady green: The USB voice mail module is registered.
•
Off: No module is detected.
1
19