Connecting the Equipment
Connecting and Configuring the Switch
NOTE
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
This chapter explains how to connect your equipment and upgrade the firmware.
At the end of each section, you verify that the installation is progressing correctly.
•
"Connecting and Configuring the Switch," on page 38
•
"Installing the SPA9000," on page 46
•
"Installing the IP Phones," on page 53
•
"Installing the SPA400," on page 58
Before installing any equipment, you need to connect the SLM224P Ethernet
switch to a network broadband router or Integrated Access Device (IAD). If the site
is not already equipped with another broadband router/IAD, Cisco recommends
the use of the WRV200 broadband router to connect to the access device.
•
"Connecting the Switch to the Router," on page 39
•
"Configuring the Switch," on page 40
In this guide, the SLM224P switch is used in all examples. However, various Cisco
switches can be used with SPA9000 Voice System. Cisco recommends use of the
SLMxxxP, SRWxxxP and SRWxxxMP switch product families with SPA9000 Voice
System. For more information, visit the following URL:
www.cisco.com/cisco/web/solutions/small_business/products/
routers_switches/index.html
4
38