Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 53

Connecting the Equipment
Connecting and Configuring the Equipment (New Installation)
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Start the Wizard on the administration computer.
To install and configure a new system, click the first option, This is the first time....
•
Use the second option if you have previously configured this SPA9000, and the
C:\linksys\PBX <mac address>
•
The Advanced Feature Menu is for experienced users only. See
"Maintaining Your SPA9000 Voice System."
•
A message appears if you select the first-time option but have previously
configured the SPA9000. Select Yes to cause the Wizard to extract and use the
configuration from the C:\linksys\PBX
cause the Wizard to delete the C:\linksys\PBX
Click Next to continue to the Network Installation page.
.act file exists.
<mac address>
<mac address>
4
Chapter 6,
.act file. Select No to
.act file.
51