Connecting the Equipment
Introducing the Setup Wizard
Introducing the Setup Wizard
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
The Cisco SPA9000 Voice System Setup Wizard guides you through the entire
installation process, from connecting cables, to powering on, to configuring the
Auto Attendant and other services.
Wizard Capabilities
The Wizard assists with the following advanced tasks:
•
Backing up and restoration of device configuration
•
Changing device's network settings
•
Upgrading device's firmware
•
Configuring NAT settings
•
Configuring SIP trunks in only a few clicks
Downloading the Wizard
You can download the Wizard from
Redirect.x?mdfid=282414116
Extracting the Wizard
The file must be extracted and used on one computer that is on the same network
as the SPA9000. You must unzip all of the files from the zip archive before starting
the Wizard. The Wizard will not properly function if you double-click the Wizard file
within the compressed archive file.
Choosing an Administration Computer for the Wizard
You must choose one PC on which to run the Wizard. The Wizard creates files that
are stored in a local directory, C:\linksys. If you run another copy of the Wizard
from another PC, you will have two sets of files, and your system settings will be
Before using the Wizard on another PC, first copy the
affected.
file to the second PC in order to populate the Wizard's phone extension table.
address>.act
http://tools.cisco.com/support/downloads/go/
4
C:\linksys\PBX<MAC-
43