Maintaining Your SPA9000 Voice System
Removing a Forgotten Password (Expert Only)
Removing a Forgotten Password (Expert Only)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Information for Expert Users
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
In the event that a password has been forgotten and needs to be changed, you
can reset the password.
Locate the device's most recent backup file.
Make a copy of the backup file.
Edit the copied backup file.
Locate the <Admin_Passwd> parameter.
Example: <Admin_Passwd>*************</Admin_Passwd>
Delete all of the asterisks.
Save the file.
Factory reset the device.
Retrieve the configuration from file.
Save the configuration to device.
This section of the guide contains information that expert users may find useful
when working with the Wizard. In addition, this section describes the Advanced
Feature Menu.
Wizard Directories
Two directories are used by the Wizard:
•
~"\Wizard <version>" [where ~ represents any directory]
The ~"\Wizard <version>" directory is created when the Wizard's zip archive
file is uncompressed and unarchived.
The entire contents of the Wizard's zip file must be extracted from the
NOTE
zip file. Attempting to run the Wizard directly from the zip archive file
will result in failure.
6
141