Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 112

Maintaining Your SPA9000 Voice System
Backing Up and Restoring Device Configurations
STEP 6
STEP 7
STEP 8
STEP 9
TIP
STEP 10
STEP 11
STEP 12
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Select the file, and then click Open.
Click OK when the Load Succeeded message appears.
Click Save configuration to device.
Click Next to preview the parameters that will be set on the device.
This is a good time to verify that you selected the appropriate backup file by
scrolling through the preview.
Click OK to close the dialog box and to submit the configuration to the device.
Wait while the Wizard displays progress messages and reboots the device.
Click OK when the Save Succeeded message appears. The device configuration
is now restored.
6
110