Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 142

Maintaining Your SPA9000 Voice System
Replacing a Phone (Experts Only)
STEP 9
STEP 10
STEP 11
STEP 12
STEP 13
STEP 14
STEP 15
STEP 16
STEP 17
STEP 18
STEP 19
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Select the new phone from the Device drop-down menu.
Select Retrieve configuration from file.
Click Next to display the Open file dialog.
Navigate to the renamed backup file.
Click Open to start the load from file.
Click OK to when the Load Succeeded message appears.
Select Save configuration to device.
Click Next to preview the changes that will be sent to the phone.
Click OK to close the preview window.
Wait while the Wizard displays progress messages and reboots the phone.
Click OK when the Save Succeeded message appears.
The new phone now has the same configuration as the replaced phone and is
ready for use.
6
140