Localizing The Spa400 Voice Mail Prompts (Optional) - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Connecting the Equipment
Configuring Client Stations
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
After you click OK to upgrade, a confirmation message appears, confirming the
old version number and the new version to be installed.
Click OK to begin the upgrade process. A series of progress messages appear as
the Wizard upgrades the firmware.
Click OK when the Upgrade Succeeded message appears. The Configure Client
Station - Configure SPA IP Phone page appears.
Continue with Step 3 on page

Localizing the SPA400 Voice Mail Prompts (Optional)

By default, English language sound files are provided on the SPA400 USB drive.
You can localize the voice mail prompts to use languages other than English.
Download the necessary language files from Cisco Partner Central, Voice &
Conferencing page, Technical Resources section, using the following URL:
www.cisco.com/web/partners/sell/smb/products/
voice_and_conferencing.html#~vc_technical_resources
Extract the files:
a. Use WinZip to open the sounds.zip file.
b. Click Extract on WinZip toolbar.
c. Select the Desktop or other temporary destination, select the Use folder
names check box, and then click Extract.
A progress bar appears as the files are extracted. The Sounds folder appears
in the selected location.
Move the files to the SPA400 USB drive to replace the existing voice prompts:
a. Power off the SPA400 by removing the power cord, and then remove the USB
drive.
b. Insert the SPA400 USB drive into a USB port on the PC where you extracted
the files.
86.
4
94