Maintaining Your SPA9000 Voice System
Upgrading the Firmware
Upgrading the Firmware
NOTE
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
•
Network Settings: Choose this option to configure dynamic or static IP
addresses and to define DNS entries. These procedures are described in
"Configuring a Static IP Address on the SPA9000 (If Prompted)," on page
•
Firmware Upgrade: Choose this option to upgrade the firmware on the SPA
devices. These procedures are described in
page100.
•
Save / Load Configuration: Choose this option to backup and restore your
SPA9000 Voice System configuration. These procedures are described in
"Backing Up and Restoring Device Configurations," on page
Use the Firmware Upgrade feature to upgrade the firmware on all devices.
The Wizard uses the firmware files that are stored in its root directory. If you
download new firmware, you should store it in this location for easy installation with
the Wizard.
"Upgrading the Firmware," on
106.
6
59.
100