Adding A Phone To An Existing Configuration - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Maintaining Your SPA9000 Voice System

Adding a Phone to an Existing Configuration

Adding a Phone to an Existing Configuration
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
This example explains how to add a phone, called TYG, extension 31, to an
existing configuration.
Click the Menu button to open the Main Menu.
On the Main Menu, select Configure Client Stations.
Follow the instructions on the Configure SPA9xx IP Phones page to connect the
new phone to the switch.
The phone reboots and initializes, and an extension number appears on the phone
display. You can change the extension number later, if needed.
Click Next to display the Configure Client Station page.
From the Current Phone drop-down list, choose the MAC address of the new
phone.
Click Next to display the next Configure Client Station page.
From the Station Name drop-down list, choose an available name, or click Add
New to enter a new name and extension number.
6
138