Connecting The Switch To The Router - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Connecting the Equipment
Connecting and Configuring the Switch
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard

Connecting the Switch to the Router

In this procedure, you connect the switch to the router and a power source.
Connect a network cable to one of the LAN ports on your router. Then connect the
other end of the cable to a LAN port on the switch.
Connect an administrative computer to an Ethernet port on the switch. The PC
needs to have an IP address on the same network as the switch, which has a
default IP address of 192. 1 68. 1 .254.
Connect the power cord to the back of the switch, and then connect the power
adapter to an electrical outlet.
The Power LED is solid amber during the Power-On Self Test (POST). Then the
LED is solid green. You are ready to configure the switch.
4
39