Maintaining Your SPA9000 Voice System
Backing Up and Restoring Device Configurations
STEP 8
STEP 9
NOTE
Backing Up and Restoring Device Configurations
STEP 1
STEP 2
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Wait while the wizard displays progress messages and reboots the phones.
Click OK when the Submit Succeeded message appears.
To complete the Mediatrix configuration please see the
Guide
, which can be downloaded from Cisco Partner Central at
web/partners/sell/smb/.
The Wizard makes it easy to back up and restore device configurations. You can
perform the following tasks:
•
"Backing Up the Device Configurations," on page106
•
"Restoring a Previous Configuration to a Device," on page108
Backing Up the Device Configurations
It is a good practice to save all device configurations before you make any
configuration change. Later, if problems occur or if the changes are not accepted
by the users, you can load the saved configurations to restore the previous device
settings.
From the Main Menu, click Save / Load Configuration, and then click Next.
Wait while the Wizard displays progress messages and discovers the connected
devices.
The Save/Load Configuration page appears.
6
Mediatrix Configuration
www.cisco.com/
106