Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 138

Maintaining Your SPA9000 Voice System
Using the Advanced Features Menu
TIP
STEP 1
STEP 2
STEP 3
STEP 4
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
In the event that you need to monitor a SPA9x1 phone, you can configure a shared
line appearance on a SPA9x2 phone and then configure the SPA932 to monitor the
SPA9x1 phone with the Wizard. The Wizard will use the SPA9x2 phone to monitor
the SPA9x1's SLA, allowing you to effectively monitor a SPA9x1 phone. In the
following example, the SPA932 key 2 is assigned to monitor a SPA901 IP phone.
From the Main Menu, click Advanced Features, and then click Next.
Advanced Features
From the
click Next.
In the SPA962, choose the SPA962 that you want to configure.
In the Unit field, choose the SPA932, if more than one is connected to the SPA962.
You may have up to two units connected to a SPA962. Unit 1 is the unit that
NOTE
is connected directly to the AUX port of the SPA962. Unit 2 is connected to
the AUX OUT port on the first SPA932.
page, choose SPA932 Attendant Console, and then
6
136