Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 20

Getting Started
Introducing Components of the SPA9000 Voice System
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
LED
INTERNET
PHONE 1, PHONE 2
SPA9000 Back Panel
Port
PHONE 1, PHONE 2
ETHERNET
INTERNET
POWER
Description/Notes
•
Green: The device is connected to the Internet.
•
Flashing Green: The device is experiencing network
activity.
•
Unlit: The device is not connected to the Internet.
•
Green: The phone is on hook and is registered with an
active Internet phone service account.
•
Unlit: The phone is on hook but is not registered with an
active Internet phone service account.
•
Flashing Green: The phone is off hook.
Description/Notes
Use these ports to connect analog phones or fax
machines to your IP phone account.
The use of this port is deprecated. You can use it for
direct connection of an administration computer, but
the recommended best practice is connect your
administration computer to a LAN switch that is
connected to the SPA9000's INTERNET port.
Use this port to connect the SPA9000 to the Local Area
Network (LAN). The cable may be connected to a
switch, router or Integrated Access Device.
Use this port to connect to the external Power adapter
(PA100).
1
18