Before You Begin Configuring
IP and Firmware Settings
Alarm Settings
54
The IP and Firmware Settings panel on the Device settings tab mirrors the information that
is available in the Honeywell IP Utility. It provides read-only network and firmware settings
and video formats without having to access the IP Utility.
Figure 4-7
IP and Firmware Settings on the Device Information Tab
Device Name as entered in the IP
Utility program
IP Address on the network
(DHCP/Static/APIPA)
Subnet Mask and Default
Gateway that connects the HNVE1
to the network
MAC Address is a factory assigned
address unique for each device
Firmware Settings including
product name and version
Video Format (NTSC or PAL)
Figure 4-8
shows the alarm settings on the Device Settings tab. See
Contacts, page
59
for more detailed information.
Figure 4-8
Alarm Settings on the Device Settings Tab
Set the Alarm Input as Normally
Open, Normally Close, or Disable
Set the Alarm Output as Normally
Open or Normally Close
Programming Alarm