Manufacturer's Declaration Of Conformance; North America; Europe; Warranty And Service - Honeywell HNVE1 Reference Manual

Manufacturer's Declaration of Conformance

North America

Europe

Warranty and Service

Document 800-04195 Rev B
11/09
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, you are encouraged to try to
correct the interference. For example, try reorienting or relocating the receiving antenna,
increasing the separation between the equipment and receiver, or connecting the
equipment to an outlet on a different circuit.
Caution Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
The equipment supplied with this guide conforms to UL 60950-1 and CSA C22.2 No.
60950-1.
The manufacturer declares that the equipment supplied with this guide is compliant with
the essential protection requirements of the EMC directive 89/336/EEC and the Low
Voltage Directive LVD 73/23 EEC, conforming to the requirements of standards EN 55022
for emissions, EN 50130-4 for immunity, and EN 60950 for Electrical Equipment safety.
Subject to the terms and conditions listed on the Product warranty, during the warranty
period Honeywell will repair or replace, at its sole option, free of charge, any defective
products returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer
Service at 1.800.796.CCTV for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available
for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped
to Honeywell without a clearly identified Return Merchandise Authorization (RMA)
number may be refused.
HNVE1 V2.1 1-Channel Encoder Reference Guide
13