Encoder And Device Configuration; Configuring Connected Devices; Programming Alarm Contacts - Honeywell HNVE1 Reference Manual

Encoder and Device Configuration

Configuring Connected Devices

Programming Alarm Contacts

Document 800-04195 Rev B
11/09
This chapter covers:
• Configuring connected devices:
• Contacts (alarms)
• PTZ domes and fixed cameras
• Configuring the image quality and compression settings
• Configuring tamper detection settings for video analytics
Use the Device Settings tab to configure alarm inputs and outputs, connected devices
(PTZ domes and fixed cameras), and select the appropriate video termination.
Use the Device Settings tab to configure alarm settings.
Alarm Inputs
When alarm inputs are connected, the camera triggers an alarm only when the normal
state (open or closed) changes. Set the Alarm Input field as shown in
Connecting Alarms on page
When an alarm input event is detected, an alarm message appears on the Web-Client
screen (see Figure 5-9) to notify the operator.
21 for more information.
5
Figure 5-1. See
59