Table of Contents
Advertisement
Encoder Installation
Before you Begin
Unpack Everything
Document 800-04195 Rev B
11/09
This chapter contains information on connecting and configuring the HNVE1 Encoder for
use with Honeywell analog video cameras such as the ACUIX™ high speed PTZ dome
and digital video recorders (DVRs) such as the Fusion DVR.
This chapter describes how to:
•
Mount the HNVE1
•
Set up the HNVE1 in a network system
Please read this guide carefully before you install the HNVE1.
Keep this guide for future reference.
Before installing the HNVE1, Honeywell recommends that you search
www.honeywellvideo.com
to find your Encoder and download the latest software updates
and manuals. For more information, see Method 2 in
Software
on page 30.
Check that the items received match those listed on the order form and packing slip. In
addition to this guide, the packing box should include,:
Part
HNVE1 Encoder main unit
Power Supply (100-240V AC)
Terminal strip (RS485) for PTZ control and alarm I/O
2
Installing the Honeywell IP Utility
Quantity
1
1
2
17
Advertisement
Table of Contents
Troubleshooting
