Table 4-3 Special Presets Available Based On Protocol - Honeywell HNVE1 Reference Manual

Document 800-04195 Rev B
11/09
Saving a Preset
After positioning the dome using the PTZ controls in Live View, you can quickly save that
position and then continue to monitor the area. Using this method, you can store only
camera presets 1-4.
Note Any existing saved dome position in the preset is replaced with the new
preset configured in Live View. Configuring new presets in Live View
overrides/replaces existing saved presets (1-4).
To save a preset:
1. Click the Live View tab.
2. Position the dome (pan and tilt) and adjust the camera lens (zoom, focus, and iris)
using the PTZ controls.
3. Type in a number from 1 to 4 in the Quick Program Preset Details field.
4. Click Program to save the position to the preset.
Selecting a Preset
See Table 4-3 for a list of reserved special presets based on specific PTZ protocols.
Table 4-3 Special Presets Available Based on Protocol
Protocol
Pelco P
Pelco D
TM
IntelliBus
Diamond
MAXPRO-Net
VCL
To select a preset:
1. Click the Live View tab.
2. Select a preset from the Preset Details list.
3. Click . The camera moves to the preset.
HNVE1 V2.1 1-Channel Encoder Reference Guide
Special Preset
80-99
80-99
71, 72, 73, 75, 98, 99
71--79, 98, 99
80-99
80-99
51