About This Document
Overview of Contents
Document 800-04195 Rev B
11/09
This document introduces the HNVE1 1-channel encoder, part of the EQUIP
suite of IP products, which includes fixed cameras, PTZ domes, and encoders.
This document covers how to install, configure, and operate the 1-channel encoder.
Troubleshooting and specification reference information is also included.
This document contains the following chapters and appendixes:
•
Chapter 1,
Introduction, introduces the EQUIP™ Series
HNVE1 V2.1, and gives a functional overview of its components.
•
Chapter 2, Encoder
Installation, provides details on setting up the HNVE1 system,
including encoder controls and functions, system connections, and mounting
instructions.
•
Chapter 3, Installing the Honeywell IP Utility and Web-Client
to install and use the Honeywell IP Utility and Web-Client software.
•
Chapter 4, Before You Begin
features and functions.
•
Chapter 5, Encoder and Device
application to view video and configure and run devices connected to the HNVE1
encoder.
•
Chapter 6, System
Administration, contains information on changing passwords on
the IP Utility and Web-Client, upgrading firmware on the HNVE1 encoder, and
uninstalling the IP Utility and ActiveX control.
•
Appendix A,
Troubleshooting, provides information for common technical issues.
•
Appendix B, Reference
•
Appendix C,
Glossary, explains terms that appear in this guide;
•
Index
provides a quick access to commonly searched for items.
HNVE1 V2.1 1-Channel Encoder Reference Guide
Configuring, introduces the Web-Client interface
Configuration, describes how to use the Web-Client
Information, lists HNVE1 specifications.
TM
Series
Software, describes how
11