Table of Contents
Advertisement
Encoder and Device Configuration
64
Table 5-3
Reserved Presets
Preset
71
72
73 – 74
75
76 – 79
98
99
Configuring a Preset
1.
Select the PTZ Dome Setup tab (see
2.
Position the dome (pan and tilt) and adjust the camera lens (zoom, focus, and iris)
using the PTZ Control (see
3.
Click Program to display the on-screen menu and using the keyboard, type in a new
001
160
number from
to
4.
Type in a title for the preset and press
Table 5-4
Example of PTZ Dome Programming Functions
'C' to Change Name
Location
'E' to Edit Preset
'D' to Delete Preset
'S' to Save Preset
'N' to Save Name
5.
Select an option using the keyboard.
6.
When complete, configure another preset by returning to
the menu.
Going to a Preset
1.
Select the PTZ Dome Setup tab.
2.
Under Preset Details, click
The OSD menu opens.
Function
Reserved
Recover encrypted PIN
Reserved
Administrator logon screen
Reserved
Camera Reset
Nightshot On/Off
Figure 5-3
Figure 4-5
on
page
49).
Enter
, then press
.
Enter
to display the following options:
Use the arrow keys to reposition the
location of the preset title on the video
screen.
Modifies the preset set in
Deletes the preset number entered in
step
3.
Saves the current settings for the preset
number entered in
Saves only the title entered in
preset number entered in
and iris settings are not saved.
.
on
page
62).
step
3.
step
3.
step 4
for the
step
3. The PTZ
Esc
step 1
or press
to exit
Advertisement
Table of Contents
Troubleshooting
