Overview Of Installation Procedure; Hnve1 Encoder Front And Rear Panels; Front Panel - Honeywell HNVE1 Reference Manual

Encoder Installation

Overview of Installation Procedure

HNVE1 Encoder Front and Rear Panels

Front Panel

18
Part
Rack mount ear brackets
Honeywell CD containing this guide, the IP Utility, and EQUIP
User Guides)
Printed Quick Install Guide
If any parts are missing or damaged, contact the dealer you purchased the HNVE1 from or
call Honeywell Customer Service (see
Note Please familiarize yourself with the installation procedure and complete each
step in the sequence given.
The initial installation of an HNVE1 consists of the following steps:
Step
1 Make the connections
2 Mount the HNVE1
3 Install the software
4 Configure the HNVE1
Figure 2-1 shows the front panel.
Warranty and Service
See ...
Rear Panel Connectors on page
Mounting the HNVE1 Encoder
Installing the Honeywell IP Utility Software
Configuring Connected Devices
Table 2-1 lists the LEDs and describes their functions.
Quantity
4
™
Series 1
1
on page 13).
19
on page 24
on page 30
on page 59